Torch Paste is specially formulated to minimize leaks when used with reusable or one-time use stencils. Torch Paste can be used on wood, cardboard, MDF, cardstock, denim and more to create unique burned designs.
How to use Torch Paste : A little goes a long way!!
When using on wood, sand your surface first; we recommend sanding smooth with 220 grit sandpaper.
Add your stencil and burnish well to so it adheres strongly to your surface.
Metamark Sign Mask Vinyl works great for stencils on hard surfaces https://n5nzi4ybee1zl1c5-57143853256.shopifypreview.com/collections/metamark-signmask
Apply a thin layer of Torch Paste with a squeegee.
Scrape off excess and return to jar ( can be reused for future projects!)
Remove stencil and allow Torch Paste to absorb/dry for at least 2-3 minutes.
Use a Heat gun, we use Ozito 2000W Variable Temperature Heat Gun from Bunnings (cheap at $49.95)
Move the heat gun over the design until the design begins to burn; more heat equals a darker burn. Make sure not to leave the heat gun in the one spot too long
After the design is burned, allow the surface to cool and wipe away any debris with a clean, soft cloth.
Finish project with a stain or sealer, or leave natural. (you can seal with the Gilly's food safe wax or chopping board oil https://n5nzi4ybee1zl1c5-57143853256.shopifypreview.com/search?type=product&q=gilly%27s
Torch Paste Features :
Exclusive thick formula perfect for using with stencils
Made in USA.
Conforms to ASTM D-4236
Store in a cool, dry area <22°c
Do NOT eat
Use only for intended purpose
Burn safely by using goggles and in a well ventilated area
Keep out of reach of children